- 註冊時間
- 2010-6-12
- 最後登錄
- 2024-9-2
- 在線時間
- 5837 小時
- 閱讀權限
- 90
- 積分
- 72956
- 帖子
- 8642
- 精華
- 0
- UID
- 11983
 
|
玩......橘子 坯 坯嘻 2
不知那裡不是很爽...好像開不了機...
看看.......- HELLO! BOOT0 is starting!
- boot0 commit : 8
- boot0 version : 4.0
- set pll start
- set pll end
- rtc[0] value = 0x00000000
- rtc[1] value = 0x00000000
- rtc[2] value = 0x00000000
- rtc[3] value = 0x00000000
- rtc[4] value = 0x00000000
- rtc[5] value = 0x00000000
- DRAM BOOT DRIVE INFO: V0.6
- the chip id is 0x00000001
- the chip id is 0x00000001
- the chip id is 0x00000001
- the chip id is 0x00000001
- the chip id is 0x00000001
- axp not exist
- DRAM CLK =672 MHZ
- DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM zq value: 0x003b3bf9
- DRAM SIZE =1024 M
- DRAM simple test OK.
- dram size =1024
- card no is 0
- sdcard 0 line count 4
- [mmc]: mmc driver ver 2016-03-15 20:40
- [mmc]: sdc0 spd mode error, 2
- [mmc]: Wrong media type 0x00000000
- [mmc]: ***Try SD card 0***
- [mmc]: HSSDR52/SDR25 4 bit
- [mmc]: 50000000 Hz
- [mmc]: 3724 MB
- [mmc]: ***SD/MMC 0 init OK!!!***
- sum=99842d61
- src_sum=99842d61
- read boot-pkg from emmc 32800 sector
- Succeed in loading uboot from sdmmc flash.
- Entry_name = u-boot
- Entry_name = monitor
- Entry_name = scp
- set arisc reset to de-assert state
- Ready to disable icache.
- 邗?? Configuring SPC Controller
- NOTICE: BL3-1: v1.0(debug):3ffd944
- NOTICE: BL3-1: Built : 11:09:10, Aug 30 2016
- NOTICE: BL3-1 commit: 3ffd9442d4769d7fc0002770e3b69b55150a288e
- INFO: BL3-1: Initializing runtime services
- ERROR: Error initializing runtime service tspd_fast
- INFO: BL3-1: Preparing for EL3 exit to normal world
- INFO: BL3-1: Next image address = 0x4a000000
- INFO: BL3-1: Next image spsr = 0x1d3
- U-Boot 2014.07 (Sep 28 2016 - 11:04:05) Allwinner Technology
- uboot commit : 8
- secure enable bit: 0
- i2c: secure monitor exist
- [ 0.717]pmbus: ready
- u0:48105000
- [ 0.721][ARISC] :arisc initialize
- [ 0.751][ARISC] :arisc para ok
- [SCP] :sunxi-arisc driver begin startup 2
- [SCP] :arisc version: [sun8iw5_v0.03.00-244-gb750b8e]
- [SCP] :sunxi-arisc driver v1.20 is starting
- [ 0.767][ARISC] :sunxi-arisc driver startup succeeded
- axp: get node[charger0] error
- [SCP ERROR] :message process error
- [SCP ERROR] :message addr : 48105080
- [SCP ERROR] :message state : 5
- [SCP ERROR] :message attr : 2
- [SCP ERROR] :message type : 80
- [SCP ERROR] :message result : f3
- [SCP WARING] :callback not install
- [SCP ERROR] :arisc twi read pmu reg 0x3 err
- probe axp806 failed
- axp_probe error
- [ 0.801]PMU: cpux 1008 Mhz,AXI=336 Mhz
- PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz MBus=400Mhz
- run key detect
- no key found
- no uart input
- DRAM: 1 GiB
- fdt addr: 0x76e9e080
- Relocation Offset is: 35ef1000
- axp: get node[charger0] error
- In: serial
- Out: serial
- Err: serial
- gic: sec monitor mode
- [box standby] read rtc = 0x0
- [box standby] start_type = 0x1
- [box standby] to kernel
- boot_init_gpio used
- ir boot recovery not used
- workmode = 0,storage type = 1
- [ 1.006]MMC: 0
- [mmc]: mmc driver ver 2016-05-20 17:18:00-test0
- [mmc]: get card2_boot_para:sdc_ex_dly_used 0
- [mmc]: no mmc-hs400-1_8v!
- [mmc]: no mmc-hs200-1_8v!
- [mmc]: no mmc-ddr-1_8v!
- [mmc]: delete max-frequency from dtb
- SUNXI SD/MMC: 0
- [mmc]: 50 MHz...
- [mmc]: sample: 63 - 158(ps)
- [mmc]: 100 MHz...
- [mmc]: sample: 32 - 156(ps)
- [mmc]: 200 MHz...
- [mmc]: sample: 16 - 156(ps)
- [mmc]: media type 0x0
- [mmc]: Wrong media type 0x0
- [mmc]: ************Try SD card 0************
- [mmc]: host caps: 0x27
- [mmc]: MID 02 PSN 36fb5ad8
- [mmc]: PNM SA04G -- 0x53-41-30-34-47
- [mmc]: PRV 1.1
- [mmc]: MDT m-8 y-2013
- [mmc]: speed mode : HSSDR52/SDR25
- [mmc]: clock : 50000000 Hz
- [mmc]: bus_width : 4 bit
- [mmc]: user capacity : 3724 MB
- [mmc]: ************SD/MMC 0 init OK!!!************
- [mmc]: erase_grp_size : 0x1WrBlk*0x200=0x200 Byte
- [mmc]: secure_feature : 0x0
- [mmc]: secure_removal_type : 0x0
- [ 1.204]sunxi flash init ok
- [ 1.220]start
- drv_disp_init
- tv_init:
- tv_probe:000
- no report hpd work,you need support the switch class!
- screen 0 don't support TV!
- tv_init:
- fetch tv1 err.
- drv_disp_init finish
- hdcp is closed by sys config.
- ** Unrecognized filesystem type **
- hpd_dev_num=2, id of def_output_dev is 0
- hdmi hpd out, force open?
- fdt_setprop_u32 disp.init_disp(0x20b0404) code:<no error>
- fb_id=0, size=3686400, gd->ram_size=1073741824, SUNXI_DISPLAY_FRAME_BUFFER_SIZE=
- 16777216
- [ 1.793]end
- PowerBus = 0( 2:vBus 3:acBus other: not exist)
- no battery, limit to dc
- no battery exist
- sunxi_bmp_logo_display
- ** Unrecognized filesystem type **
- sunxi bmp info error : unable to open logo file sunxi_flash
- bmp_name=bootlogo.bmp
- reading bootlogo.bmp
- 3686454 bytes read in 164 ms (21.4 MiB/s)
- fdt_setprop_string disp.boot_fb0(7f000000,500,2d0,20,1400,0,0,500,2d0). ret-code
- :<no error>
- --------fastboot partitions--------
- -total partitions:15-
- -name- -start- -size-
- bootloader : 1000000 1000000
- env : 2000000 1000000
- boot : 3000000 1000000
- system : 4000000 60000000
- verity_block: 64000000 1000000
- misc : 65000000 1000000
- recovery : 66000000 2000000
- sysrecovery : 68000000 60000000
- private : c8000000 1000000
- alog : c9000000 4000000
- Reserve0 : cd000000 1000000
- Reserve1 : ce000000 2000000
- Reserve2 : d0000000 1000000
- cache : d1000000 30000000
- UDISK : 1000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- misc partition found
- to be run cmd=run setargs_mmc boot_normal
- read item0 copy0
- Item0 (Map) magic is bad
- the secure storage item0 copy0 is bad
- read item0 copy1
- Item0 (Map) magic is bad
- the secure storage item0 copy0 == copy1, the data is good
- the secure storage map is empty
- no item name selinux in the map
- sunxi storage read fail
- no item name mac in the map
- sunxi storage read fail
- no item name wifi_mac in the map
- sunxi storage read fail
- no item name bt_mac in the map
- sunxi storage read fail
- no item name specialstr in the map
- sunxi storage read fail
- check user data form private
- the user data'magic is bad
- update dtb dram start
- update dtb dram end
- serial is: 34005036401440210a4d
- [ 2.236]inter uboot shell
- Hit any key to stop autoboot: 0
- read partition: boot or recovery
- [ 2.967]sunxi flash read :offset 3000000, 15589577 bytes OK
- Kernel load addr 0x40080000 size 11883 KiB
- RAM disk load addr 0x41000000 size 2318 KiB
- [ 3.030]ready to boot
- prepare for kernel
- [mmc]: MMC Device 2 not found
- [mmc]: mmc 2 not find, so not exit
- Starting kernel ...
- INFO: BL3-1: Next image address = 0x40080000
- INFO: BL3-1: Next image spsr = 0x3c5
|
|
|
|
|
|
|
|
發表於 2017-4-11 20:32:10
分享到FB
